Roof replacement and repair in Metairie, installed for wind and rain
Shingle, metal and low-slope roofing with the details that decide how a roof performs when the next storm rolls in from the Gulf.

Roofing with Oliver Nola
Your roof takes the hardest hits in South Louisiana: intense sun, heavy rain that arrives sideways, high humidity and the threat of hurricane winds every season. Oliver Nola installs, replaces and repairs roofs in Metairie and the surrounding communities with materials and methods chosen for that climate.
A roof replacement with us starts with a full inspection of the deck, flashing, ventilation and drainage, not just the shingles. Many leaks blamed on shingles actually come from failed flashing at walls, chimneys and vents, or from a deck that has softened under old roofing. Finding those issues early keeps a new roof from inheriting old problems.
We install architectural asphalt shingles, metal roofing and low-slope systems for porches and additions. For each one we focus on the details that decide storm performance: correct nailing patterns, sealed starter courses, proper underlayment and flashing that is integrated with the walls and siding instead of simply caulked over.
Ventilation and attic airflow get as much attention as the surface. A roof that cannot breathe traps heat and moisture, which shortens shingle life and can lead to mold on the underside of the deck. We balance intake and exhaust so the system works the way manufacturers intend.
When storms do cause damage, we help homeowners in Metairie, Kenner, Jefferson and Gretna document what happened, make temporary repairs to stop water from entering and plan permanent work. We explain what we find in plain terms so you can make decisions with your insurer, while the claim itself remains between you and your insurance company.
We also look at how the roof connects to the rest of the house. Gutters, soffits, siding and the attic all affect how water and air move, and a roof project is often the right moment to correct a problem in one of those areas instead of leaving it for later.
We also look at how the roof connects to the rest of the house. Gutters, soffits, siding and the attic all affect how water and air move, and a roof project is often the right moment to correct a problem in one of those areas instead of leaving it for later.
Planning more than one project? See how this service connects with siding and new construction, or read answers on our FAQ page.
Benefits of working with us on roofing
Full-system inspection
Deck, flashing, ventilation and gutters are evaluated together, not just the visible shingles.
Wind-focused installation
Fastening, starter strips and edge details follow manufacturer guidance for high-wind areas.
Proper flashing
Walls, chimneys, valleys and penetrations get integrated flashing instead of surface sealant shortcuts.
Balanced ventilation
Intake and exhaust are sized so the attic stays drier and the roof lasts longer.
Clear material choices
We compare shingle, metal and low-slope options for your home, budget and roof pitch.
Protected property
Tarps, magnetic sweeps and daily cleanup keep nails and debris out of your yard and driveway.
What is included
Inspection
- Roof surface assessment
- Deck and attic check
- Flashing and penetration review
- Photo report
Replacement
- Tear-off and disposal
- Deck repair where needed
- Underlayment and leak barrier at critical areas
- Shingle or metal installation
Repairs
- Leak tracing
- Flashing replacement
- Damaged shingle replacement
- Pipe boot and vent repair
Storm response
- Damage documentation
- Temporary tarping
- Written repair scope
- Scheduling of permanent repairs
Our roofing process
Roof inspection
We inspect the roof and attic, photograph problem areas and explain what is worn, what is damaged and what is still sound.
Options and pricing
You receive a written proposal comparing materials and scope, including any deck repairs we expect to find.
Scheduling and protection
We schedule around the forecast, deliver materials and protect landscaping, windows and outdoor areas.
Installation
Tear-off, deck repair, underlayment, flashing and roofing are completed in sequence, with the home dried in at the end of each day.
Cleanup and review
We sweep for nails, remove debris and walk the finished roof with you, photos included.
Why hire a professional
Roofing failures rarely start in the middle of a shingle. They start at edges, valleys and wall intersections, where installation skill matters most. A professional crew knows how to flash those areas so water is directed away rather than held back by caulk that dries out in a few years.
Working on a roof is also genuinely dangerous. Fall protection, safe material handling and proper disposal are part of the job, and they are good reasons to leave roofing to a crew that does it every week.
Finally, a professional installation follows the manufacturer's written requirements, which is often a condition of the product warranty. That paperwork matters when you sell the house or file a claim.
Finally, a professional installation follows the manufacturer's written requirements, which is often a condition of the product warranty. That paperwork matters when you sell the house or file a claim.
Real projects




Roofing questions
Isolated leaks and a few damaged shingles can usually be repaired. Widespread curling, granule loss, soft decking or repeated leaks in different spots point toward replacement. Our inspection explains which category your roof falls into.
Most residential replacements take one to three days of active work, depending on size, pitch, deck repairs and weather.
Quality architectural shingles and metal roofing can both perform well in high winds when installed correctly. Installation details, especially fastening and edge treatment, matter as much as the material.
We can inspect the roof, document damage with photos and provide a written repair scope you can share with your insurer. Coverage decisions are made by your insurance company.
Most of these leaks come from flashing that has failed or was never integrated correctly. Replacing the flashing properly usually solves leaks that sealant only delays.
Without balanced airflow, heat and moisture build up in the attic, which can shorten shingle life, raise cooling costs and encourage mold on the roof deck.
Yes. We tear off existing roofing down to the deck so we can inspect and repair it before new materials go on.
Related services
Service coverage
We provide roofing throughout these communities. Contact us to confirm your address.
- Metairie
- New Orleans
- Kenner
- Harahan
- River Ridge
- Jefferson
- Gretna
- Harvey
- Westwego
- Chalmette
Planning roofing work?
Share a few details and we will arrange a visit and a written estimate.



